Tuesday, November 17, 2026
Home Open Innovation

Open Innovation

Changes and Prospects for Open Innovation in Post-Corona

The COVID-19 (novel coronavirus) pandemic is having a major impact on social and economic conditions. Major changes are taking place not only in the structure of society, but also in the consciousness of individuals, and a new normal is taking hold. What should open innovation look like in this post-Corona era of rapid change? We will analyze the current state of open innovation and examine its future prospects. # New Normal # Post Corona # Open Innovation

Mitsui Chemicals × Z-Works|Full-scale deployment of Z-Work's monitoring system for nursing care beds, which uses a piezoelectric sensor developed by Mitsui Chemicals, begins.

LiveConnect®, a nursing care support system with vital sensors for nursing care beds manufactured by Z-Works*2 and employing PIEZOLA®*1, a tension sensing base material with a flexible ultra-fine coaxial wire structure developed by Mitsui Chemicals, has begun full-scale deployment at nursing care facilities. So far, the effectiveness of the system has been verified at four facilities in Chiba and Okinawa prefectures, and 10 facilities have decided to install the system. Sales activities are being strengthened for future nationwide deployment. In addition, this system has been certified as a "product approved by the Tokyo Metropolitan Government's Trial Order Certification System for Emergency Countermeasures against the New Type of Coronavirus Infectious Disease in FY202020"*3. The system is expected to spread further because of the advantages it offers in terms of introduction.

Kanto Bureau of Economy, Trade and Industry|Adoption of Regional Companies to Participate in the Regional Enterprise/Startup Co-Creation Accelerator Challenge

The Kanto Bureau of Economy, Trade and Industry, in cooperation with Creww Inc. We are pleased to announce that three regional companies have been selected to take up the challenge of creating new value through co-creation with startups. We plan to call for proposals from startups by the end of November.

Open Innovation by Hamamatsu City|Monozukuri x Venture Innovation

Creww and Hamamatsu City launched the Hamamatsu Accelerator 2020, a municipal open innovation program in the summer of 2020. What is the purpose of Hamamatsu's open innovation program? We also spoke with Mr. Ema, Deputy Director of the Hamamatsu City Industry Department, and Mr. Sugiura of the Venture Support Group, Industry Promotion Division, Industry Department, Hamamatsu City, about the future vision of Hamamatsu City as a result of the accelerator program.

SmartDrive and Knight-Ray to Collaborate on Data Linkage and Collaborative Solutions|Idemitsu Kosan Begins Using Ultra-compact EVs in Car-Sharing Demonstration Experiments

Smart Drive, a provider of services that utilize mobility data, and Knight Ray, a provider of regional revitalization support solutions that use location-based big data and analysis technology, have begun developing and providing data linkage and collaborative solutions. As the first user of this collaborative solution, Idemitsu Kosan will link data with SmartDrive's Mobility Data Platform, which is being used by Idemitsu Kosan in a demonstration experiment for the practical application of ultra-compact EV car sharing in Tateyama City and Minamiboso City, Chiba Prefecture, The data is being used to improve the utilization rate of the car sharing service and to develop tourist attractions.

Zero Product Realization Rate 25%|STARTUP STUDIO

Six months have passed since the incubation program start STARTUP STUDIO by Creww started in April 2020. Once again, we ask ourselves, "What on earth is the Startup Studio doing?" Are the projects progressing well? We will take a look back at the past projects.

Japan's first "Faculty of Entrepreneurship" to open at Musashino University in April 2021|Yoichi Ito appointed Dean!

In April 2021, Musashino University will open its 12th undergraduate school, the School of Entrepreneurship, at its Musashino Campus. A press conference will be held on Monday, November 9 to commemorate the opening of the new faculty, the first of its kind in Japan. Yoichi Ito will assume the role of dean, and the faculty, consisting mainly of active practitioners, will nurture people who can "do things" on their own.

First in Japan!" EPOCH TABLE, a tableware sharing service that allows customers to create their "stylish and coveted dining table" at home|Open Innovation by Ishizuka Glass and Castamedia

Ishizuka Glass has built EPOCH TABLE, the first tableware (tableware) sharing service by a Japanese tableware manufacturer, based on Custommedia's Custommedia MASE, which enables customers to realize at home a stylish and admired dining table like a famous hotel or a movie they saw one day. # sharing service #Open Innovation #EPOCH TABLE #Ishizuka Glass

Takeoff Shizuoka, an accelerator for Shizuoka creation by Shizuoka Keizai Doyukai x INSPIRE, was launched!

INSPIRE, a general incorporated association that runs one of the largest local innovation innovator platforms in Japan, is co-launching the "Takeoff Shizuoka" accelerator with the Shizuoka Association of Corporate Executives as a business growth support program to accelerate local revitalization! The program is open to a wide variety of companies and organizations aiming for regional revitalization in the central region of Shizuoka Prefecture. #Shizuoka #Accelerator Program #New Normal Shizuoka #INSPIRE

What is the secret of human resources to be selected for the incubation program?

In general incubation programs, what are the criteria that the secretariat looks for in terms of the qualities of founders and teams responsible for promoting projects? In this article, we would like to talk about the criteria used by Creww's incubation program "STARTUP STUDIO by Creww" to select founders. #Startup Studio #incubation #STARTUPSTUDIO # Creww

Digital Garage, FDC, and Fukuoka Growth Next begin accepting applications for the second phase of "Onlab FUKUOKA," an open innovation program.

Digital Garage, Fukuoka Regional Strategic Promotion Council, and Fukuoka City Startup Support Facility Management Committee have started accepting applications for the second phase of "Open Network Lab FUKUOKA", an open innovation program aimed at creating smart city and smart life businesses in the New Normal era in the Fukuoka region. FUKUOKA, an open innovation program aimed at creating smart city and smart life businesses in the New Normal era in the Fukuoka region, began accepting applications from companies participating in the second phase of the program on October 13, 2020! #Digital Garage #Fukuoka #Open Innovation

Marui Group launches initiatives to create new businesses through open innovation with future generations

Marui Group will hold the "Future Accelerator Gateway," a program in which participants are invited from the future generation of university and graduate school students to work in teams with Marui Group employees to create new businesses. Marui Group will accelerate its efforts with the future generation in cooperation with Life's Tech, an IT education program operator for junior high and high school students, with whom Marui Group has a capital and business alliance.
- Advertisment -
- Advertisment -

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

Popular Tags

EDITOR'S PICK

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

自治体・DMO×スタートアップ、静岡で5件のインバウンド実証実験を開始|SHIZUOKA INBOUND TOURISM INNOVATION 2026

静岡銀行(頭取 八木 稔)では、Creww Regional Innovations株式会社(代表取締役 田中 健策)と連携し、静岡県内の自治体・観光地域づくり法人(DMO)等とスタートアップ企業が取り組む実証実験の内容や今後の取組方針を発表する「フォローアップミーティング」を開催。県内各地域で5件の実証実験を開始したことを発表した。 静岡銀行とCreww Regional Innovations社は、2026年4月に静岡県と締結した業務委託契約に基づき、インバウンドの誘客や受入れに関する課題解決をめざすプロジェクト「SHIZUOKA INBOUND TOURISMINNOVATION2026」 に取り組んでいます。 本プロジェクトでは、地域の課題とスタートアップ企業の技術・サービスを結び付け、今般、県内各地域で5件の実証実験を開始しました。当日は、各実証実験の内容や今後の取組方針に加え、過年度に採択されたスタートアップ企業によるサービスの本格導入や他地域への展開事例を紹介するとともに、参加者による交流・意見交換が行われました。

エッセンシャル産業のAX。キューテスト中原絵梨香が仙台から挑む、子育て支援の「安心・安全」標準化

ベビーシッターと家事代行という、暮らしに最も近い現場から、産後うつや虐待の予兆を見逃さないAIシステムを開発する株式会社キューテスト。「Miyagi Pitch Contest 2025」では特別賞(ポケットサイン賞)とオーディエンス賞のダブル受賞を果たした。代表取締役の中原絵梨香氏に、現場発のシステム開発、行政連携の実態、そして子育て支援インフラとしての展望を聞いた。 現場発のSaaS開発——「県内唯一」のベビーシッター事業から始まった 宮城県提供 キューテストの主軸事業「Family Sitter」は、生後0カ月から対応できるベビーシッター・家事代行サービスだ。宮城県内でも保育事業所としてこの月齢に対応する事業所はほとんどなく、核家族や親族が近くにいない子育て世帯の受け皿になっている。保育士7名は全員が保育園勤務5年以上のベテランで、フルタイムで働けない「潜在保育士」を積極的に雇用する体制を敷いている。

3Dコンクリートプリンティングで建設DXを築く。株式会社築・五十嵐理香氏が挑む、建設革新

建設業界が抱える人手不足・技能継承・環境負荷という構造課題に、3Dコンクリートプリンティング(3DCP)で挑む株式会社築(KIZUKI)。2025年には建築確認・完了検査・販売まで完了した日本初の2階建て3Dプリント住宅「ステルス・ハウス」を完成させた。「Miyagi Pitch Contest 2025」で特別賞、2026年にはサポーター賞を受賞。代表取締役の五十嵐理香氏に、事業の原点と建設DXの展望を聞いた。 起業からのはじまり——畑違いの領域で、資格を一つずつ取得 父の事業承継が拓いた、まったく畑違いの挑戦 五十嵐氏はもともとIT業界出身で、建築業界とは無縁だった。転機は2021年、父が急逝し、仮設リース業(トイレやハウスのリース)を営んでいた一人親方の事業を引き継ぐことになったことだ。「そのまま同じ仕事を続けるのは自分には難しい」と感じていた時、ヨーロッパで3Dプリンターによる住宅建設のニュースに触れた。「IT出身だからこそ、建築というよりシステムとして解決できる可能性を感じた」と、事業転換を決めた。