Tuesday, November 17, 2026

Let's correctly address the pitfalls that can lead to open innovation failure.

Open innovation is an initiative to create new businesses and expand operations by incorporating knowledge and technology from other companies and industries. However, it is not surprising that open innovation has several pitfalls that can lead to failure.
Open innovation without understanding this fact will only increase the risk of failure. Properly understanding and avoiding these pitfalls will lead to successful open innovation.
This article describes the points that are likely to become pitfalls in open innovation and measures to avoid falling into them.
Table of Contents
...Open innovation can fail.
Four points of potential pitfalls
How to Avoid the Pitfalls
...the risk of failure of open innovation can be reduced.

Open innovation can fail.

Open innovation is an important initiative that can lead to corporate growth, butFailure to do so with ambiguous goalsConnections. A new business that incorporates open innovation, in which many people from other companies and other industries participate, is completely different from an existing business. Many people from other companies and other industries will participate.

If we continue with our existing business ideas, we may suffer significant losses due to failure rather than corporate growth. Please see below for specific pitfalls that can lead to failure.

Four points that can easily become pitfalls

While open innovation can bring in new technologies and knowledge, it also has the potential for failure. Let's look at four of the most common pitfalls.

Open innovation implementation becomes an objective

In some cases, the implementation of open innovation has become an objective in itself without clarifying the purpose of implementation. The purpose of open innovation is to create new business, but in some cases, the implementation of open innovation has become an end in itself.

In this case, it is out of line with its original purpose and, as a result, does not work, increasing the likelihood of failure.It is important to thoroughly implement measures and improvements to achieve the objective of "why open innovation is being conducted".It is.

Unequal Contracts

Unequal contracts are one of the most common pitfalls between start-ups and large companies. There have been cases of exploitation, such as a large company demanding that a startup company provide a license for a service it has developed.

The key to implementing open innovation is to work on an equal footing. To seek such an unequal agreement with colleagues seeking to co-create would be detrimental to the creation of new value. Mutual enterprises.Respect and equality are the keys to success in open innovation.It is.

Dependence on specific individuals

Open innovation that relies on specific individuals carries an increased risk of failure. Business development through open innovation is often unprecedented, and in many cases, there is no fixed method of handling it.

If the project relies on the competence and ability of a particular individual under such circumstances, the project itself will stagnate if there are transfers or retirements. In the worst case, the project may even come to a halt.

Not a specific individual,Establish a system where teams can work and follow up with each otherThis will prevent the project from becoming stagnant or abortive.

Weak authority of the department or person in charge

Open innovation in a situation where the authority of the department or person in charge is weak is likely to lead to failure. In the case of start-ups, management and executives will often be directly involved in the project.

However, in large companies, it is common for the person in charge of the project to be the main participant. Weak authority on the part of those in charge of the project can cause delays in the speed of decision-making and affect the project as a whole.

The success of open innovation depends on giving those in charge as large a budget and as much authority as possible.This is the case.

Measures to avoid falling into the pitfalls

Although the number of companies engaging in open innovation is on the rise, there is no guarantee of success. Here are some specific measures to avoid falling into the pitfalls of open innovation.

High resolution goal setting

It is important to set a high resolution of goals through open innovation. Open innovation is a means to create new business, not an end.

Setting a high-resolution goal clarifies what needs to be done now, and makes it easier to test the hypothesis that accompanies it.Always make sure you are moving correctly toward your goal is the shortcut to success.will be.

Project progression in the same position

It is also important that the members participating in the project are on the same page. If they are not on the same page and do not share the same passion, it will be difficult to build a relationship, and this will lead to the failure of open innovation.

Considerations and mechanisms that allow large companies, start-ups, and research institutions to maintain the same position.is required.

See failure as a step toward success

Failure must also be viewed as a step toward success. As mentioned above, open innovation will often challenge the unprecedented.

Taking on a challenge that no one has tackled before means that there is a high possibility of failure. However, it is important not to evaluate failure as a failure, but as an opportunity to make a difference in the lives of others.It is important to focus on "why did we fail?" and whether or not we can make use of it in the next step.It is.

The risk of failure of open innovation can be mitigated.

So far, we have explained the points that are likely to become pitfalls in open innovation and measures to avoid falling into them.

We hope you now understand that open innovation has pitfalls that can easily lead to failure. However, those pitfalls areCan be countered by simply making a few adjustments to the way the project progresses and how it is perceivedIt is.

Let's practice open innovation with low risk of failure by referring to the information presented in this issue.

PORT Editorial Officehttps://port.creww.me/
PORT by Creww is an open innovation media for startups, entrepreneurs, entrepreneurs in recovery, and companies seeking to create new businesses on the theme of social issues, operated by Creww Co.

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

新潟日報社、オープンイノベーションプログラム2026ピッチ審査会で「三ツ目」「想ひ人」2社を選定

新潟日報社は8月4日、「新潟日報社 オープンイノベーションプログラム2026 ピッチ審査会」を開催した。Creww株式会社が提供する「Creww Growth」を活用し、5月15日から6月15日にかけて新潟県や社会が抱える課題解決に向けた協業アイデアを募集。応募61件の中から書類審査を通過した8社がピッチに参加し、審査の結果「三ツ目」(新潟県三条市)と「想ひ人」(東京都)の2社を選定した。今後は実証事業等を通じて事業化を進める予定。

【ヤマサキ × BeeInventor】高温下での過酷な作業環境から、データは命を守れるか——創業151年の工業炉建設会社とスマートヘルメット新興企業が挑む「熱中症ゼロ」の現場

明治8年創業の株式会社ヤマサキは、建設業界向けアクセラレータープログラム「ヤマサキ×オープンイノベーションプログラム2024」を通じて、スマートヘルメットを手がけるビーインベンターとのPoCを実施した。内部温度800度を超える製鉄炉の傍らで働く現場作業員の熱中症リスクをAIで早期検知するという挑戦は、今まさに第2フェーズへと移行しようとしている。プロジェクトリーダーの向井裕一氏と、BeeInventor(ビーインベンター)のNao SeoChon氏に話を伺った。

【ヤマサキ × CHAOSRU】「誰も知らない技術」を、誰もが体験できる価値へ——創業151年の工業炉建設会社とVRスタートアップが挑む、採用×認知の壁の壊し方

明治8年創業の株式会社ヤマサキは、製鉄に欠かせない築炉の技術を持ちながら、業界・企業の認知度の壁が採用の課題となっていた。この課題の突破口を探るべく参加したのが、『ヤマサキ×オープンイノベーションプログラム2024』だ。プログラムを通じて、VR・XR技術を核とする株式会社CHAOSRUとの協業をスタート。2025年7月から始まったPoC(実証実験)では、高校生向け採用説明会へのVR体験の導入により、ブース来訪者数に明らかな変化が生まれている。アクセラレータープログラムを通じたスタートアップとの協業で何が動き、何が見えてきたのか。株式会社ヤマサキのプロジェクトリーダー 田中敏彦氏と、CHAOSRU代表取締役の内藤薫氏に話を伺った。