Tuesday, November 17, 2026

Report on "Open Innovation Conference 2017" [Part 1

Creww Corporation, a startup community operator, held the Open Innovation Conference 2017 on April 25, an event aimed at accelerating open innovation between startups and large companies. The event was attended by more than 500 people from large companies who are in charge of creating new businesses with startups. The venue was filled with excitement as speakers from Japan and abroad who are active on the front lines were invited. creww magazine will be the first to report on the event.
*This article is reprinted from an article published in CREW MAGAZINE on May 2, 2017.

Opening Speech

In the opening session, Mr. Ten Ijichi, President of Creww, Inc., passionately explained about open innovation between startups and large corporations, which has been on the rise in recent years. He told the participants, "Creww's strength is the community of people who create such innovations. As a startup, we at creww will continue to implement the PDCA cycle at high speed and provide examples of open innovation to the world," he added, thanking the participants and sharing his thoughts on his company's business.

Session1: The essence of open innovation as perceived by large companies

Then, the sessions by the experts began. Session 1: The Essence of Open Innovation as Seen by Large Corporations" featured three speakers: Professor Oo of Kobe University's Graduate School of Innovation in Science and Technology; Mr. Koizumi, Manager of the Corporate Value Creation Department, Corporate Planning Division, Tokyo Subway Company; and Mr. Noma, Manager of the New Business Promotion Section, Corporate Strategy Department, Corporate Planning Division, Canon Marketing Japan Inc. The three speakers discussed the essence of open innovation, using specific examples.

In working on joint projects with startups, he says, "The essence of open innovation is the challenge of new business that cannot be seen from current issues.

Canon Marketing Japan also took the opportunity of the collaboration to conduct personnel exchanges with startups, which seemed to play a role in developing human resources within the company.

Session2: Accelerators Needed Now

In Session 2, "Accelerators Needed Now," Don Burton from TechStars, Oscar Kneppers, founder of Dutch accelerator Rockstart, Tim Romero from creww, and CEO Sorato Ijichi participated in a heated discussion. Tim Romero from creww and CEO Sorato Ijichi also participated in the session and heated discussions ensued.

He also shared examples of accelerator programs in other countries. "It is important to start with a small initiative without thinking too much, rather than suddenly forming a large partnership with a startup," and "In the U.S., there is a culture of accepting that it is an experiment and that it is okay to fail. In the U.S., there is a culture that it is okay to fail by acknowledging that it is an experiment. In the U.S., there is a culture that it is OK to fail by acknowledging that it is an experiment. If you fail, just pivot," and many other methods that would be applicable in Japan also popped up in this valuable session.

Session3: Open Innovation through Case Studies

The last session, "Open Innovation through Case Studies," was moderated by Ms. Mariko Nishimura, Representative Director of HEART CATCH, Inc. and featured collaborative case studies by Mr. Matsuhashi, Managing Executive Officer of Seven Bank, and Mr. Kuwabara, CEO of Dremming Co.

Mr. Matsuhashi strongly states that the most important thing in realizing open innovation is to "gather the members who want to do it, give them the authority, and get it done in a short period of time. The creww collaboration really gave me a chance. It is a new business model, so it is difficult to understand the market. Mr. Kuwabara of Dremming thanked Mr. Matsuhashi and talked about the passion of both parties for future global expansion.

"Open Innovation Conference 2017" Report [Part 2]

May 24, 2017
PORT Editorial Officehttps://port.creww.me/
PORT by Creww is an open innovation media for startups, entrepreneurs, entrepreneurs in recovery, and companies seeking to create new businesses on the theme of social issues, operated by Creww Co.

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

新潟日報社、オープンイノベーションプログラム2026ピッチ審査会で「三ツ目」「想ひ人」2社を選定

新潟日報社は8月4日、「新潟日報社 オープンイノベーションプログラム2026 ピッチ審査会」を開催した。Creww株式会社が提供する「Creww Growth」を活用し、5月15日から6月15日にかけて新潟県や社会が抱える課題解決に向けた協業アイデアを募集。応募61件の中から書類審査を通過した8社がピッチに参加し、審査の結果「三ツ目」(新潟県三条市)と「想ひ人」(東京都)の2社を選定した。今後は実証事業等を通じて事業化を進める予定。

【ヤマサキ × BeeInventor】高温下での過酷な作業環境から、データは命を守れるか——創業151年の工業炉建設会社とスマートヘルメット新興企業が挑む「熱中症ゼロ」の現場

明治8年創業の株式会社ヤマサキは、建設業界向けアクセラレータープログラム「ヤマサキ×オープンイノベーションプログラム2024」を通じて、スマートヘルメットを手がけるビーインベンターとのPoCを実施した。内部温度800度を超える製鉄炉の傍らで働く現場作業員の熱中症リスクをAIで早期検知するという挑戦は、今まさに第2フェーズへと移行しようとしている。プロジェクトリーダーの向井裕一氏と、BeeInventor(ビーインベンター)のNao SeoChon氏に話を伺った。

【ヤマサキ × CHAOSRU】「誰も知らない技術」を、誰もが体験できる価値へ——創業151年の工業炉建設会社とVRスタートアップが挑む、採用×認知の壁の壊し方

明治8年創業の株式会社ヤマサキは、製鉄に欠かせない築炉の技術を持ちながら、業界・企業の認知度の壁が採用の課題となっていた。この課題の突破口を探るべく参加したのが、『ヤマサキ×オープンイノベーションプログラム2024』だ。プログラムを通じて、VR・XR技術を核とする株式会社CHAOSRUとの協業をスタート。2025年7月から始まったPoC(実証実験)では、高校生向け採用説明会へのVR体験の導入により、ブース来訪者数に明らかな変化が生まれている。アクセラレータープログラムを通じたスタートアップとの協業で何が動き、何が見えてきたのか。株式会社ヤマサキのプロジェクトリーダー 田中敏彦氏と、CHAOSRU代表取締役の内藤薫氏に話を伺った。