Three years after its inception, OIC has held the "Business Creation Tora no Maki Seminar" five times from the angle of the business creation process and open innovation. The theme of the third seminar is "Business Planning. The session aimed to share what challenges each company encountered in creating new businesses and how they tried to overcome them, so that the participants could make use of the information in their new businesses of tomorrow.
Nei Koizumi, Toppan Printing Co.
Nobuyuki Matsuda, Digital Garage, Inc.
What is the mission of Toppan Printing's new business?
small spring: Our department isTo do new, discontinuous business that has nothing to do with printing."is the mission. Developing new markets within existing businesses. We can also try to develop new businesses in existing markets that we have not entered before, and we can do this through open innovation. However, we are notNon-Continuous New BusinessSince we are doing theNothing can be started without a specific external resource analysis.Right?
Growing fields, deep tech, food and agriculture, or health and medicine, robotics and biotechnology are areas in which printing companies have no experience, so they basically do not have their own resources. Therefore, it is necessary to analyze external resources working in these fields.
To compensate for "missing parts
Miyagawa:There are three basic things to do to compensate for missing parts.
One: "Do it on your own."The following is a list of the most common problems with the
Second: "Co-create through open innovation (large companies and ventures)"The following is a list of the most common problems with the
Third: "M&A" or "Business Conclusion"The following is a list of the most common problems with the
Most likely, the choices will be narrowed down to these three.
small spring: I mentioned that "we can't do it ourselves on our own" because of the missing parts. Large companies, especially when it comes to new businesses in the technology field, may often work with start-ups to fill in the missing parts and commercialize their business development themes.This pattern is often the case for new projects with a business development theme.
There are many startups with great technology or business models. If you have a new business proposal that takes advantage of the technology, we can develop it in each sector. If we find a startup company that has a great technology or business model that we haven't entered yet, but we would like to do business with them, we will develop a new business plan that takes advantage of that technology and provide it to each department. In considering various business ideas,"To fantasize about each business."I think it is very important to

We want to gather management resources. How should we appeal internally and externally?
- Toppan Printing set up an office in Silicon Valley in 2013, right? As you said, "Being in charge of new business, I began to think that nothing gets done without partnering with startups." How did you approach new business both internally and externally?
small springI made the decision to invest in a fund in Silicon Valley and approached upper management to pull the money together. I received tremendous opposition, but I convinced them that if we did not do this, we would not be able to achieve the next stage of growth.
When Toppan went there, the response was almost always, "What are you doing here, a printing company? So our first priority was to get people to understand the company's philosophy. Then, gradually, we would talk about what we actually wanted to do.
The key, in the end, is to use the "Choice of "withdraw if cash cannot be generated from a business strategy standpoint".However, new businesses do not generate much money, so it is difficult to gather management resources. However, new businesses do not generate much money, so it is difficult to gather management resources.
We have no choice but to repeatedly remind management that KPIs for maintaining and growing existing businesses are completely different from KPIs for creating new businesses.
I believe that being able to share failures is a growth strategy and that risk-taking is important. I also believe that people who can monetize their work in this context will be in demand in the future.
Toppan Printing Open Innovation Case Study
Koizumi:Toppan Printing is actually involved in a wide range of open innovation projects, including smart agriculture, smart energy, VR, AR, big data, AI, fintech, automated driving, and space business. We are working with Japanese and U.S. technology, as well as with other companies in the space industry.We look at business models and see and hear about ideas, inspiration, and the latest developments in the world of technology.The following is a list of the most common problems with the
Connect: Open innovation to recruit competing technologies
Open Innovation Lab operation: Hold a VISICON within the company and pick up and commercialize the ideas. Also, call the person who made the actual idea to the department.
Japan Gallery: A space for co-creating a tourism nation
Koizumi:First, we meet. We will see how things go, and then work together to develop a business or invest in a company. This is the process we are following.
What are the verification details of the demonstration experiment?
What are the key elements of an effective demonstration experiment in today's world? Mr. Koizumi points out three key points for verification of demonstration experiments.
(1) How is the technology itself on a technical level?
(2) Verification and whether the effect has been properly achieved.
(iii) Is feasibility feasibility really possible?
Of the above, Koizumi continues, the third point in particular will not work if it is done closed.
Koizumi:Social implementation typeYes, it is better to actually integrate it into the society and start small already. I believe that the time has come to verify the results in an environment similar to actual operations. While researching dramatic changes in innovation, we should seek socially implemented innovations. I think it is very important to make a hypothesis in advance and tune it while verifying it.
Will it be done solely by the company, in collaboration, or with the involvement of the client?
The discernment of whether to do it by other means or by oneself is also important.
The focus is on Shenzhen! Socially Implemented Innovation Partnering with Local Authorities
I think it will be important in the future to work with local governments to conduct demonstration experiments and implement them in society. I think this trend will become more important in the future. The next city that Mr. Koizumi is focusing on is Shenzhen, which has been called the Silicon Valley of Asia. It is a hot city that is now attracting attention as the Silicon Valley of Asia.
Koizumi:The city is near Hong Kong and can be reached by train in about 1.5 hours. Buses and cabs are also 100% electric vehicles. Also, it is a super-surveillance society, so there are cameras everywhere and crime is almost non-existent.
<Features of Shenzhen
...one of the world's leading innovation cities with an ecosystem of 1.4 billion people behind it.
The government is giving preferential treatment in the special economic zone.
The government is encouraging anyone to start a business and innovate together.
The 60% allows for socially implemented innovation by cutting over existing products and verifying the results. (Unlike Japan, this is similar to Silicon Valley.)
We can experiment in a real city. Very loose regulations.
Koizumi:The common denominator in everything that is happening in China right now is AI and big data. There is no resistance to having data taken. In Shenzhen, we can design, develop, inspect, and mass produce products, as well as conduct demonstration tests and business development. So, I believe that research, demonstration, and self-production will be considered in the future.
Koizumi:Finally. I believe that risk-taking is important because being able to share failures is a growth strategy. We believe that change entails risk, but that not changing entails greater risk.

Digital Garage Business Planning
◇Success rate of new business
Mr. Matsuda cited figures such as. According to Google, the probability that an entrepreneur funded by venture capital will succeed is 151 TP3T, the survival rate of a new company by Yagyu of Uniqlo after 10 years is 51 TP3T, and the probability that a venture company can go to the last IGJIT if the number of requests for investment by major VCs is 1001 TP3T is 0.1%.
Matsuda.What we need to be aware of is that "new businesses will basically fail if they are conducted in a normal manner. I think it is very important to be aware that we are working on something that is that difficult.
◇What are the current trends in new business?
What is the direction of new business that did not exist 10 years ago? Based on Matsuda's experience, the attitudes of large companies have changed as follows.
We want to create new products not only with our own technology, but also in collaboration with external parties, including venture companies!
I don't want any more surveys of other companies in the same industry! I want information on large domestic and foreign companies, other companies or ventures, and people doing new things.
We would rather put our company name out there! Or, we would like to promote collaborative joint development, such as showing the product to customers and receiving ideas.
◇Three traps that new businesses tend to fall into?
NG (1) Throwing sales rounds
Matsuda.The most common case when you want to launch a new product for an existing market is nicheization. The market has already been dug out, so if you try to launch a new product in that market, you will end up with a very narrow niche product. If you try to launch a small product in a market where there are already a lot of hot-selling products, the sales department will not sell it.
The problem of the sales department not selling is a very big one. Even if the planning department has worked very hard to come up with a plan, when they hand it over to the sales department, they put it in the catalog, but they don't sell it at all. This is a very common case.
We've made a good product! The marketing research is perfect, so all we have to do is sell it. The sales department will take care of the rest." This is another pattern that does not go well.
NG (2) Easy product-out
Matsuda:When trying to expand into new businesses with existing products, there is often a lack of competitiveness. As is the case in Japan and the U.S., when a market is mature, the level of user demand is high. In addition, there are often strong players specializing in various fields. There are already products in the world that match the very detailed needs of the field. If you are in a different industry, you may not know this, and you may get burned if you enter a new market too easily.
NG ③Market-in on the table
Matsuda:A common mistake when targeting new business with new products is that all companies target the same market. It is a growing market and the market size is large. And they can use their own resources. I think this is a very logical analysis, but in the case of Japan, it is the senior market. We know that the nursing care market will increase as well. We know that the nursing care market will also increase. What we have to be careful of is that all companies analyze the same information and come to the same conclusions.
New projects are in the order of "Japanese, math, science, and social studies!

Matsuda.So: here's my recommendation on how to do new business.
Japanese, arithmetic, science, and social studiesThis is a term familiar to all of you. It is the frame of Mr. Akira Ishikawa, who used to run a business idea contest called RING (Recruit Co., Ltd.) and is the founder of All About. What he is saying is that new businesses should be conceived in this order.
(1) Japanese... XX-kun read this sentence and answer the Japanese question, "What kind of problems does XX-kun have? The first thing to do is to think about who is complaining and what they would like to see happen.
(2) Arithmetic...I mean, let's talk about how heavy the complaints found in the language are, how often they occur, how many are gross, and that kind of numerical talk.
(iii) ScienceI am asking you to think about technologies and methods to solve this negative situation. What kind of methods can we use to make this a reality in society?
4) Society...Finally, let's consider the negative regulations. If regulations change in the world, it may be impossible to do business, and this is one of the knockout factors.
Matsuda.: In quite a few cases, you have to think from the opposite direction. For example, if you look at the statistics of the Japanese market, the number of old people is increasing. You say, "Our company has a special technology. We can provide services to this many people by using it. And it has this kind of value.
Japanese, math, science, and social studies should be done from the top.The reason for this is that unless you have a firm grasp of what you are delivering to whom in the world, rather than thinking in product-out terms, everything behind the scenes will become a theoretical framework. The reason is that unless you have a firm grasp of what you are delivering to whom in the world, rather than thinking in terms of product-out, everything behind the scenes will become a theoretical empty theory. It is no good if you talk about science first.
◇Open Innovation: The Appeal of Working with Startups
As mentioned in Mr. Koizumi's lecture, open innovation has its limits when it comes to using outside resources. Not only business idea contests and accelerators, but also business alliances and collaborations are risky...
Matsuda.Startups: startups have not yet entered the market, both in terms of technology and market.Challenging the realm of knowledge numbers and doing what large companies can't do.I think that's the beauty of being a startup. Therein lies the beauty of being a startup, after all. Also, while accelerators are mainly for large companies to fill in missing pieces, they are mainly serendipity,The point is to encounter things that had not been created before, and the connection with the participants is more important than the result itself.
◇What is the secret to success in new business?
As a final message, Mr. Matsuda introduced several points to bring the three aforementioned failing typicals closer to success.
Point 1: Quickly
The bottom line is to conduct customer interviews, and to do this quickly, building and improving the product as it is prototyped.
Point 2) Desk marketing takes one hour.
Finding people who really want to pay to use the product. To define the market properly so that it can be scaled to a business scale, and to make a product that fits that market.
Point 3) Establish a value chain that is viable as a business
If you just make a product and ask the sales department to sell it, but you don't have that value chain, it wouldn't work in the first place. If you ask the sales department to prepare the sales message and even the sales kit options, they will work quite well. It is important to plan the path to sales.
Mr. Nei Koizumi General Manager, New Business Development Department, Business Innovation Promotion DivisionLtd., where he worked mainly in the business strategy and business development divisions. He has also served as an outside director of E4C Link Inc. since 2006, and established a Silicon Valley representative office in 2013.
He served as a member of the Advanced IoT Project Selection Council Selection Committee of the METI IoT Promotion Lab from 2016 to 2018.
Currently engaged in new business development in discontinuous areas (unexplored fields) through open innovation.
Mr. Tetsuo Matsumoto seino holdings co.General Manager, Open Innovation Promotion Office
While in graduate school, he co-founded a venture company providing a communication platform for tutoring schools.
In March 2008, he received his M.S. from the University of Tokyo.
In April 2008, he joined Mitsubishi Research Institute, Inc.
Visiting Fellow, Center for Technology Management in Asia, Stanford University, USA, July 2014-June 2015.
April 2019- Deputy General Manager, OnLab Promotion Department, Digital Garage, Inc.
With his experience in consulting for new business strategies and new product/service development in the private sector, he has recently been involved in open innovation support involving startups, large companies, and local governments.
PORT Editorial Office PORT" is an open innovation media for startups, entrepreneurs, entrepreneurs in recovery, and companies aiming to create new businesses on the theme of social issues, operated by Creww, Inc.






