In addition to the construction equipment tele-operation system, we aim to realize automated operation of snowplows through a combined demonstration of a high-precision positioning system and low-latency video transmission.

Technology Verification for Realization of Automatic Operation of Snowplow Vehicles

As the birthrate declines and the population ages, there is a shortage of snow removal workers in areas with heavy snowfall and an aging workforce with experience. To solve these issues, NTT Com conducted a demonstration experiment last fiscal year in cooperation with local governments to remotely operate snowplows while checking camera images transmitted via 5G communications.
In this demonstration, NTT Com's various solutions and ARAV's construction equipment remote control system were combined to conduct technical verification toward the realization of automatic operation of snowplows.
Outline and Results of this Demonstration
(1) Outline
Implementation date: November 22, 2023
Location
Cockpit Layout ▷NTT Docomo Tohoku Building 13F 5G Open Lab (Sendai City, Miyagi Prefecture)
Snowplow deployment ▷KOIL MOBILITY FIELD (in Kashiwanoha Smart City "Innovation Campus District", Kashiwa City, Chiba Prefecture)
Details: A snowplow was installed in Chiba Prefecture, 400 km away from the cockpit in Miyagi Prefecture, and the steering wheel and accelerator were operated remotely.
(2) Results
■Reduction of barriers to introduction and low latency video transmission
Zao SDK*1 developed by Soliton Systems Inc. is used for video transmission, and its unique technology optimized for mobile lines is embedded in a compact device for vehicle installation, achieving low latency video transmission even in a wireless environment. This not only reduces barriers to introduction by expanding the range of location options, but also improves safety due to low latency.
■Realization of a safe and secure communication environment
By utilizing docomo MECⓇ*2, which enables communication processing without going through the Internet, it is now possible to prevent damage from external hijacking and transmit high-resolution images in real time.
■Realization of highly accurate location information positioning and snow removal operation data
Using centimeter-accurate accurate location information obtained by Mobile GNSS*3, IoT Connect Gateway*4 and Things Cloud®*5 were used to accumulate and visualize position data and operation data of snowplows, not only improving operability through operation feedback, By using IoT Connect Gateway*4 and Things Cloud®*5 to accumulate and visualize position data and operation data of snowplows, we collected data for machine learning necessary to realize automated driving.


Things Cloud® screen image
Role of each company
ARAV: Provision of Model V*6 remote control system for construction equipment including snowplows
NTT Com: Providing the following solutions
Smart-telecaster™ Zao SDK
docomo MECⓇ
docomo IoT high-precision GNSS location service*7
IoT Connect Mobile® Type S*8
Things Cloud®.
IoT Connect Gateway
Future Development
NTT Com and ARAV will contribute to solving issues in the snow removal field by working toward the realization of automated operation while brushing up necessary technical elements and learning data in snow removal use cases.
1:Zao SDK is the latest model of "Smart-telecaster," a video transmission system developed and provided by Soliton Systems Co. It uses a mobile line and has a unique line redundancy function that enables uninterrupted video transmission with ultra-short delays, and a control signal transmission function has been added to enable operation on a small single board computer.
2:docomo MEC® is a service that uses Multi-access Edge Computing technology to improve the real-time performance and security of 5G by placing the server as close as possible to the device being used and communicating within its own network. MEC® is a service that uses Multi-access Edge Computing technology to improve 5G real-time and security by placing servers as close as possible to the device being used and communicating within a proprietary network.
This service is provided by NTT DOCOMO and marketed by NTT Com. For more information, please visit docomo MEC portal site.
https://www.mec.docomo.ne.jp/
3:Mobile GNSS is a one-package service provided by NTT Com that includes an ultra-compact GNSS receiver terminal (MTRTK3) with a newly developed antenna, battery, and LTE module, communication service (IoT Connect Mobile® Type S), and GNSS position correction information service (docomo IoT High Precision GNSS Positioning Service). This is a high precision positioning service that utilizes RTK positioning technology, and is a one-package package that includes an ultra-compact GNSS receiver terminal (MTRTK3) with built-in IoT module.
The downsizing of the GNSS receiver terminal significantly improves portability, facilitating GNSS installation on workers and construction equipment at construction sites and other sites, thereby improving site safety and productivity through the use of accurate location information.
https://www.ntt.com/about-us/press-releases/news/article/2023/1018.html
4:IoT Connect Gateway is a gateway service provided by NTT Com that enables easy and secure cloud connectivity in accordance with cloud-side interface specifications without worrying about the processing load or data volume of IoT devices.
https://www.ntt.com/business/sdpf/service/icgw.html
5:Things Cloud® is an IoT platform provided by NTT Com that offers functions and templates that enable easy and quick non-programming implementation of functions and processes necessary for IoT implementation, including device connection, data collection, visualization, analysis, and management.
https://www.ntt.com/business/services/ai-iot/iot/things-cloud.html
6:Model V is a remote control device that can be retrofitted to legacy construction equipment provided by ARAV. The system includes hardware such as edge computers and attachments, software for remote control embedded programs, and interfaces during operation.
7:docomo IoT High Precision GNSS Positioning Service is a service provided by NTT Com that delivers position correction information required for RTK positioning based on positioning satellite observation information obtained from nationwide electronic reference points ("electronic reference points" is a registered trademark of the Geospatial Information Authority of Japan) and DOCOMO's own reference points.
https://www.ntt.com/business/services/highprecision_gnss_positioning.html
8: IoT Connect Mobile® Type S is a mobile data communication service for the IoT provided by NTT Com that supports various rate plans and connection methods.https://www.ntt.com/business/sdpf/service/icms.html
Related Links
Successful remote operation of snow removal vehicles using 5G in Showamura, Fukushima Prefecture (February 2023)https://www.ntt.com/about-us/area-info/article/20230222_2.html
| name of company | ARAV Corporation |
| Establishment | Apr. 2020 |
| Location | Entrepreneur Lab, South Research Building, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo |
| representative | Japanese white oak silkmoth (Antheraea yamamai) |
| uniform resouce locator | https://arav.jp/ |









