Tuesday, November 17, 2026

Regumin x NVIDIA] Started deployment of pesticide spraying service using autonomous agricultural robots!

REGMIN Corporation, an agri-tech startup that aims to improve the efficiency of agricultural work through the use of technology, has launched an agrochemical spraying service using an autonomous robot. The robot is designed to spray pesticides on Fukaya leeks grown in Fukaya City, Saitama Prefecture, and is equipped with the NVIDIA Jetson AGX Xavier, a platform for autonomous machines that enables high-precision autonomous driving.

Pesticide spraying, a particularly heavy burden on farmers

Reguminwas founded in 2018 by Takuhiro Naruse and Yoshihiro Noge with a desire to preserve Japanese food culture. When they first started the company, they used their knowledge of the komatsuna cultivation business they conducted in Shizuoka Prefecture as the basis for a project in Fukaya City, Saitama Prefecture, calledDEEP VALLEY Agritech Award 2020In.Proposed robotic pesticide spraying serviceThe first time we were awarded the top prize, we started our activities in the city.

Regumin's goal was to develop a pesticide spraying robot,Among agricultural work, pesticide application is particularly burdensome.This is because of the need to prevent pests and diseases from spreading. Pesticides include not only insecticides, which are sprayed when pests appear, but also fungicides and fungicides, which are applied preliminarily, amounting to 20 to 25 different types of pesticides throughout the year.

In Japan, where most farmland is cultivated on a small scale, it is difficult to install large machinery and there are concerns about noise pollution in the neighborhood, so spraying is done mainly by human labor, which imposes heavy labor costs. In addition, there are concerns about hose routing, wearing hot protective clothing, and inhalation of pesticides,The physical and psychological burden on farmers is also great, leaving room for automation by robots.Mr. Narusei thought.

However, unlike warehouses or agricultural greenhouses that are moved under certain conditions, the ground in open-air cultivation is dirt and can be bumpy or slippery in places,Difficulty in controlling autonomous driving has made it difficult to commercialize agricultural robots that actually work outside.It has been considered to be a

GPS is a convenient way to obtain location information for autonomous driving, but even with high accuracy, there are errors due to satellite positioning and radio interference,Correction by image recognition as well as GPS is essentialMr. Narusei felt that the LiDAR system was not suitable for his needs. At first, we tried to use another manufacturer's CPU board, but the processing performance was not enough because of the large amount of point cloud data to be acquired by LiDAR," Narusei says.

Ideas made possible only with Xavier and patents obtained

At such a time of year.NVIDIAMr. Narusei attended GTC Japan, an AI conference hosted by the Jetson AGX Xavier, and saw a demonstration of a robot equipped with a Jetson AGX Xavier running autonomously through an office.Xavier can enable robots that contribute to actual agricultural work.I had a gut feeling that it was a good idea, and I bought Xavier on the spot.

Xavier is a single-board computing platform that can handle OpenCV computations on the edge, as well as the CUDA processing required for deep learning. Its ease of use made it the only choice." said Narusei.

In addition, to gather information, the NVIDIA Inception Program, NVIDIA's startup support program (https://www.nvidia.com/ja-jp/startups/), which also deepened our knowledge of machine learning and image recognition.

Regumin's pesticide application robots are equipped with numerous sensors, including cameras, magnetometers, GPS, and temperature sensors, but Xavier'sBrain to process information obtained from all sensorsIt functions as a

Using Ubuntu onboard Xavier, the robot recognizes the terrain of the cultivated land using laser sensors in addition to GPS, and operates with programs written in C++ and Python. The 3D point cloud data is processed by Xavier to obtain coordinates, which are used to recognize the shape of the ridges* and to align the wheels with the hollows. This method enables highly accurate autonomous driving with a margin of error of 1 to 2 cm, for which a patent has been obtained.

Recognizes the shape of ridges and realizes highly accurate autonomous driving

By using Regumin's pesticide spraying robot,The time required to spray an area per hectare is reduced to 250 minutes, compared to 400 minutes per hectare when a person works with a power sprayer.This year, the company has been able to achieve its goal of 150 minutes of actual operation time for the pesticide application service. Furthermore, this year, by operating multiple robots simultaneously, the actual operating time of the pesticide application service is targeted to be approximately 150 minutes,Time savings of 60% or moreThe company has set forth the following The cost per hectare of work is also reduced compared to the cost of work done by a person using a power sprayer.45% cost reductionThe goal is to achieve the following

Additional features will be considered for inclusion in the future.

Regumin is also conducting research on early detection of disease and insect damage, including at the Saitama Institute of Technology,NVIDIA DGX SystemownCollaboration with universities to conduct joint research using machine learningWe are also working on

With up to 32 TOPS of computing power, the Jetson AGX Xavier module has enough power to incorporate these research findings into new robot functions in the future, which is one of the reasons Narusei chose Xavier.

Plans to expand the scope of services and areas of installation, with an eye toward global expansion.

Pesticide spraying robot is able to operate according to the width of the ridges.Therefore, it can be applied to other crops. Regumin is already planning to contract out its new pesticide application services to broccoli and cabbage, specialty crops of Fukaya City.

In addition, the company is looking to expand its services not only to other prefectures in Japan, but also to the global market in the future. In Southeast Asia in particular, there are many cases where crops are grown on small plots of land, as is the case in Japan, and Mr. Narusei expects that the services in Japan can be applied to this area.

Mr. Narusei stated the following. "The proportion of human workload in agriculture is large,Adoption of AI and other technologies is a mustIt is important to distinguish between tasks that are performed by humans and those that are automated by machines. It is important to separate the tasks that are performed by humans from those that can be automated by machines. Human knowledge and experience are required in areas such as designing fertilizers according to weather conditions and determining the varieties to be grown. Also, in areas such as research and development, sales channel development, and marketing, the quality of the product will be higher if it is done by humans.Rather than replacing everything with a machine, work can be subdivided and roles assigned based on an understanding of the user's needs, thereby increasing efficiency and improving quality.We think it's a good idea."

Ridges: Long, narrow, linear patches of soil in a field where crops are planted or sown.

PORT Editorial Officehttps://port.creww.me/
PORT by Creww is an open innovation media for startups, entrepreneurs, entrepreneurs in recovery, and companies seeking to create new businesses on the theme of social issues, operated by Creww Co.
SourceNVIDIA
- Advertisment -
- Advertisment -

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

新潟日報社、オープンイノベーションプログラム2026ピッチ審査会で「三ツ目」「想ひ人」2社を選定

新潟日報社は8月4日、「新潟日報社 オープンイノベーションプログラム2026 ピッチ審査会」を開催した。Creww株式会社が提供する「Creww Growth」を活用し、5月15日から6月15日にかけて新潟県や社会が抱える課題解決に向けた協業アイデアを募集。応募61件の中から書類審査を通過した8社がピッチに参加し、審査の結果「三ツ目」(新潟県三条市)と「想ひ人」(東京都)の2社を選定した。今後は実証事業等を通じて事業化を進める予定。

【ヤマサキ × BeeInventor】高温下での過酷な作業環境から、データは命を守れるか——創業151年の工業炉建設会社とスマートヘルメット新興企業が挑む「熱中症ゼロ」の現場

明治8年創業の株式会社ヤマサキは、建設業界向けアクセラレータープログラム「ヤマサキ×オープンイノベーションプログラム2024」を通じて、スマートヘルメットを手がけるビーインベンターとのPoCを実施した。内部温度800度を超える製鉄炉の傍らで働く現場作業員の熱中症リスクをAIで早期検知するという挑戦は、今まさに第2フェーズへと移行しようとしている。プロジェクトリーダーの向井裕一氏と、BeeInventor(ビーインベンター)のNao SeoChon氏に話を伺った。

【ヤマサキ × CHAOSRU】「誰も知らない技術」を、誰もが体験できる価値へ——創業151年の工業炉建設会社とVRスタートアップが挑む、採用×認知の壁の壊し方

明治8年創業の株式会社ヤマサキは、製鉄に欠かせない築炉の技術を持ちながら、業界・企業の認知度の壁が採用の課題となっていた。この課題の突破口を探るべく参加したのが、『ヤマサキ×オープンイノベーションプログラム2024』だ。プログラムを通じて、VR・XR技術を核とする株式会社CHAOSRUとの協業をスタート。2025年7月から始まったPoC(実証実験)では、高校生向け採用説明会へのVR体験の導入により、ブース来訪者数に明らかな変化が生まれている。アクセラレータープログラムを通じたスタートアップとの協業で何が動き、何が見えてきたのか。株式会社ヤマサキのプロジェクトリーダー 田中敏彦氏と、CHAOSRU代表取締役の内藤薫氏に話を伺った。