Tuesday, November 17, 2026

Call for Entries] Yushin Engineering Co-Creation Program 2024|New Possibilities for Electrical Equipment Needed by Society

Yushin Engineering, which has contributed to society for over 50 years through the manufacture of control panels, an important piece of equipment used to control and protect electrical equipment in factories, buildings, power plants, etc., will host an accelerator program to co-create new possibilities for control panels with startups with the aim of creating a company that will last 100 years. The deadline for application is January 17. The deadline for application is January 17.

What is the background of the co-creation program?

We at Yushin Engineering have been contributing to society for more than 50 years through the manufacture of electrical equipment called control panels, which are needed throughout the world.
Our strength lies in our technical capabilities to meet the demands of each customer, and we have built strong relationships of trust with our clients.
These are important equipment used to control and protect electrical equipment in factories, buildings, power plants, and other facilities, and we are in a world where conventional, error-free manufacturing is prioritized over innovative technology.

Outline of "Yushin Engineering Co-Creation Program 2024

▶︎ Application deadline: Friday, January 17, 2025 at 20:00
▶︎ Target companies: all domestic and international startups. Any industry.
▶︎ Participation fee: Free
▶︎ Sponsored by Tomoshin Engineering Co.

What we want to achieve with the Co-Creation Program

Establishment of education system

Yushin Engineering's core business is the manufacture of custom-made control panels, but due to reforms in work styles and increased work efficiency, a lack of training resources and difficulties in passing on skills have become challenges.
Because each project deals with a different product, newcomer training tends to rely on on-the-job training, which can lead to variations in acquired skills.
We are looking for partners to help us solve this issue, improve operational efficiency and productivity, and pass on and accumulate technology.

▶Improve efficiency of new employee training, etc. (AI, e-learning, database, AR, VR, etc.)
▶Utilization of chatbots for internal training and streamlining search operations
▶ Systematization of training manuals (documentation, video creation)
▶Visualization of skills of veteran employees (knowledge management)
▶Propose human resource development methods (web-based education, outsourcing, etc.)

Keywords: business efficiency, DX, AI, e-learning, remote management, remote control, automatic voice input, speaker identification, eyewear, eye tracking, database creation, data sharing, knowledge management, human resource development

2. Streamline and automate estimating and design work

Both quotation and design work in control panel manufacturing are based on specifications provided by the customer, and each time the person in charge searches for similar properties in the past and makes modifications or additions, both of which require a lot of work time.

Estimation work: Since specification data, drawing data, and data on the final cost of production are stored in the company, it is conceivable that a system that can be automatically generated if specifications are received could itself be created.

▶Efficient and automated estimating process (DX, AI, database, data sharing, etc.)

Design work: CAD automatic checking functions, etc., have not been systematized and trained, so there are differences in use by each individual. We have drawing data and a collection of in-house standards (a collection of rules for drawing), so we are considering the possibility of creating a system that, once a specification sheet is loaded, pulls up similar drawings from the past, highlights areas that need to be corrected, and automatically draws portions of the drawing.

▶Improve efficiency and automation of design work (DX, AI, databasing, data sharing, etc.)

3. to explore new possibilities for control panels

Our strength lies in the responsiveness and technical capabilities we have developed over 50 years of manufacturing custom-made panels to meet our customers' requirements.
Currently, our main customers are major heavy industry manufacturers, but we would like to expand into other industries and explore new possibilities for control panels with added value.
We welcome innovative and unique ideas.

Example
▶High-quality control panels with automatic detection of poor component connections and loose screws, eliminating human error.
▶Control panel that can talk with voice recognition
▶Offering the surface of the outdoor installation board as advertising space
▶Control panel that can be used as an emergency power source in times of disaster, etc.

We are also looking for a wide range of ideas other than those listed above!

Management resources (resources) of Yushin Engineering Co.

A broad corporate client base, ranging from large domestic and international companies to small and medium-sized enterprises

Our major customers include the Fuji Electric Group, Mitsubishi Heavy Industries Group, and IHI Group, with more than 50 customers requesting production at any given time.
In particular, the company has long been trusted in fields that require advanced technology, such as the electronics industry and plant facilities.
With a track record of doing business with the industry's top companies, the company's credibility has been solidly established over the years.

Ability to customize to meet complex customer needs

We have the technical capabilities to handle orders from a wide variety of customers.
The company is ISO 9001 certified and has established a system to deliver high quality products to its customers.
Support for products not only for in-country but also for overseas markets.
We also manufacture to IEC, UL, CSA, and other standards.
We have a technical tie-up company in Seoul, Korea, and can conduct demonstration tests in Korea. We also design and produce software for all domestic PLCs and overseas PLCs (A and B companies, Siemens, GE).
Control panels with the following certifications can be manufactured according to customer requirements.

Quality assurance certification items
Dedicated to shared cubicle-type emergency power supply
Formal approval of power receiving equipment Japan Electric Association
Common use No.927 CB type for outdoor use 300kVA
Common use No.928 CB type for indoor use 300kVA
Common use No.1099 Outdoor PF-S type 300kVA

JEA Emergency Switchgear Approval Committee
Dedicated type for Class 1, Exposed type (T) 1BST-0142
Class 1 common use exposed type (T) 1BPT-0095
Type 2 dedicated type 2BS-0128
Class 2 common type 2BP-0120

Evaluation Sheet (Public Buildings Association of Japan)
Control panel No. 972-06029145
Cubicle-type switchboard No. 972-06031926
Distribution board (including experimental board) No. 972-06019140
 
◇IEC439-1 (1992) short-circuit proof test certification
(Central Research Institute of Electric Power Industry
Low voltage control panel 3φ/400V/50Hz/1200A
Low voltage control panel 3φ/400V/50Hz/600A

Design and development capabilities

The design staff responsible for design and development capabilities is approximately 30% of employees, a ratio that has always been rare in the switchboard industry.
Our strength lies in our design and development capabilities, having responded to custom and customized products from a variety of customers.
Men and women in their 20s to 50s, young to experienced, are engaged in design work while passing on their skills in a mixed environment.

Facilities and Equipment

We also have a sheet metal shop and a painting shop, and can handle everything in-house from control panel design and manufacturing to after-sales service.
We can conduct in-house demonstrations of all processes in the control panel manufacturing process.

Head Office, Tokyo Plant (General Affairs, Sales, Design, Manufacturing: Fuchu City, Tokyo)
Kashima Plant, Kashima Paint Plant (manufacturing division and paint division: Minamisoma City, Fukushima Prefecture)
 *The painting shop has a pre-treatment tank with a maximum workpiece W2300 x D2400 x H2300.
Ichinoseki Plant (Sheet Metal Division: Ichinoseki City, Iwate Prefecture)
 *Holds AMADA AC servo direct twin drive NCT (EMZ3612M2).
Hachinohe Branch (Design Division: Hachinohe City, Aomori Prefecture)
Overseas technical partner: Hanyang Electric Works Co.

Data

We have over 50 years of experience in responding to control panel manufacturing requests from a wide variety of customers, and the in-house data we have accumulated in this process includes CAD drawing data and cost management data based on customer specifications, which may be used to contribute to product development and process improvement.
By combining these rich data resources with innovative technologies and ideas from startups, new value creation can be expected.

Enthusiasm for the Program

Perhaps because we have been manufacturing products on a make-to-order basis since our founding, our company's challenge is that we have been imbued with a passive attitude.
I took on the challenge of this program in order to change such a culture and grow into a company that can offer proposals that exceed customer needs.
This program team is made up of members who have a strong desire to overturn the norm in the industry.
We are looking forward to receiving applications from partners who are willing to take on the challenge of working together on new initiatives in the control panel industry with the aim of creating a company that will last for 100 years!

About Yushin Engineering Co.

Under our company motto, "The sky is blue, challenge towards tomorrow," we have been designing and manufacturing switchboards, control panels, and operation panels for power equipment, instrumentation equipment, and software development for buildings and various plants to meet our customers' business needs since our establishment in 1971.
Our strength is that we have established a system in which we can be entrusted with the total process from design to production according to the customer's needs, as we have our own painting and sheet-metal plants.
Support for products not only for domestic use but also for overseas use (IEC standard, UL standard, CSA standard, etc.).
We have a proven track record in a wide range of fields, including electrical equipment design for theme park attractions, electrical equipment design for theaters and stage sets, electrical equipment design for sluice gates of rivers and dams, electrical equipment design for TOKYO 2020 venues, electrical equipment design for waste incineration plants, and electrical equipment design for water supply and sewage systems.
We look forward to meeting with companies that can co-create new possibilities for control panels with the aim of becoming a company that lasts for 100 years.
http://www.yushin.co.jp/

PORT Editorial Officehttps://port.creww.me/
PORT by Creww is an open innovation media for startups, entrepreneurs, entrepreneurs in recovery, and companies seeking to create new businesses on the theme of social issues, operated by Creww Co.
- Advertisment -
- Advertisment -

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

新潟日報社、オープンイノベーションプログラム2026ピッチ審査会で「三ツ目」「想ひ人」2社を選定

新潟日報社は8月4日、「新潟日報社 オープンイノベーションプログラム2026 ピッチ審査会」を開催した。Creww株式会社が提供する「Creww Growth」を活用し、5月15日から6月15日にかけて新潟県や社会が抱える課題解決に向けた協業アイデアを募集。応募61件の中から書類審査を通過した8社がピッチに参加し、審査の結果「三ツ目」(新潟県三条市)と「想ひ人」(東京都)の2社を選定した。今後は実証事業等を通じて事業化を進める予定。

【ヤマサキ × BeeInventor】高温下での過酷な作業環境から、データは命を守れるか——創業151年の工業炉建設会社とスマートヘルメット新興企業が挑む「熱中症ゼロ」の現場

明治8年創業の株式会社ヤマサキは、建設業界向けアクセラレータープログラム「ヤマサキ×オープンイノベーションプログラム2024」を通じて、スマートヘルメットを手がけるビーインベンターとのPoCを実施した。内部温度800度を超える製鉄炉の傍らで働く現場作業員の熱中症リスクをAIで早期検知するという挑戦は、今まさに第2フェーズへと移行しようとしている。プロジェクトリーダーの向井裕一氏と、BeeInventor(ビーインベンター)のNao SeoChon氏に話を伺った。

【ヤマサキ × CHAOSRU】「誰も知らない技術」を、誰もが体験できる価値へ——創業151年の工業炉建設会社とVRスタートアップが挑む、採用×認知の壁の壊し方

明治8年創業の株式会社ヤマサキは、製鉄に欠かせない築炉の技術を持ちながら、業界・企業の認知度の壁が採用の課題となっていた。この課題の突破口を探るべく参加したのが、『ヤマサキ×オープンイノベーションプログラム2024』だ。プログラムを通じて、VR・XR技術を核とする株式会社CHAOSRUとの協業をスタート。2025年7月から始まったPoC(実証実験)では、高校生向け採用説明会へのVR体験の導入により、ブース来訪者数に明らかな変化が生まれている。アクセラレータープログラムを通じたスタートアップとの協業で何が動き、何が見えてきたのか。株式会社ヤマサキのプロジェクトリーダー 田中敏彦氏と、CHAOSRU代表取締役の内藤薫氏に話を伺った。