Tuesday, November 17, 2026

Revolutionizing the Construction Industry. Ando Hazama's Challenge for Major Business Improvement and Efficiency|Open Innovation

Ando Hazama is a general contractor that has built a wide variety of construction and infrastructure in Japan and abroad, including dams, tunnels, roads, bridges, commercial facilities, and historical buildings. In April 2019, the company established an Innovation Department and implemented an accelerator program using the services of Creww, one of the largest open innovation support services in Japan. Then, in November 2020, the company invested 100 million yen in Truss, a developer of "architecture x IT" products, with which it began collaborating. What kind of initiatives are you working on with Truss and what kind of issues are you aiming to solve? We interviewed Yukinori Furukawa, Director of Innovation Department, and Koji Saito and Tsubasa Sakakibara of the same department.

Collaboration with "truss", a "construction x IT" startup, to significantly improve operations and efficiency

-In July 2019, you began working with Truss, an "architecture x IT" startup; what were you working on before they invested in you in November 2020?

truss is a startup developing "truss," a building materials selection cloud service that enables cross-maker comparison of the vast number and variety of "building materials" and precise product searches.

In the past, designers had to search for construction materials one by one from each manufacturer's "paper catalog," a time-consuming and labor-intensive task. In addition, it was difficult to share the data internally and externally in the form of a table that summarized and listed information such as model numbers, colors, and performance of building materials, making it labor intensive to check and manage.

As a result, it took time to check the latest information, and human errors occurred across departments (organizations), such as ordering building materials based on information that had not yet been updated. However, with the use of TRUS cloud services, dispersed building material information is integrated in the cloud, resulting in a significant increase in efficiency and improvement of design work.

FINISH TABLE SYSTEM
Search for building materials from the truss database, and register and update them in the finishing table according to the degree of progress of each project.

Therefore, we have been brushing up the system with test operations in some departments since July 2019, and have been working toward a company-wide implementation.

It is easy to say "construction" in one word, but there were multiple organizations for the process, and in order to achieve collaboration with trusses, we needed to move across multiple organizations to put in a horizontal skewer. It was not easy to gain understanding and sympathy by repeatedly explaining the process to the directors and other concerned parties, but we were able to gradually gain their understanding because the sense of the issues we wanted to solve, such as the complexity of the work, the volume of work, and the time and effort required, were the same throughout the company.

Yukinori Furukawa, General Manager, Innovation Department, Ando & Hazama Co.

Currently, we expect to improve efficiency by 30-40% in the construction material selection process, and we would like to introduce a company-wide system at an early date in 2021, as well as link it with another existing system to achieve further business linkage, efficiency, and productivity improvement.

Crossing multiple organizations requires an organization dedicated to the task

-I think it was not easy to get involved across the organization. Were there any other difficulties you encountered?

Mr. Koji Saito, General Manager, Business Creation Group, Innovation Department, Ando & Hazama Co.

The collaboration with Truss began as an initiative led by architectural design employees. Meanwhile,To make it a cross-organizational effort, the Innovation Department will also work together to promote it.I have done so.

The Innovation Department was newly established in April 2019 and includes many members with administrative and sales backgrounds, with some members not specializing in systems or architectural design.

So it was quite difficult to move the project forward while learning to "personalize" the issues and explain them internally. Still, I had daily communication with Truss, and he was making improvements based on feedback from the department that was running the test operation, so I felt comfortable with him.

This was the first time for Ando Hazama to collaborate in earnest with a startup,Without a dedicated team like the Innovation Department, this would surely have been difficult to achieve.I think.

This is because IT solutions such as the Truss cloud system, although sought by all departments, are not easily accessible because it is difficult to take a sounding board across the organization and the impact on the core business is not small.

Even if the solution somehow takes shape, it will be a solution that no one will use if it is not followed through to its operation.

But it was very meaningful that the Innovation Department was able to stand around and avoid such problems.To promote open innovation, it is very important to have a function that is not a one-sided effort, but a dedicated one.I realized that this was the case.

Accelerate the speed of development through investment and demonstrate your efforts internally and externally.

-In November 2020, Ando Hazama invested about 100 million yen in Truss. What is the background of this investment?

Ando Hazama had a need for Truss to increase its development capabilities and speed up the development process, while Truss wanted to increase its capital in order to achieve a quicker introduction. The needs of the two companies matched, and the investment was made in order to resolve them.

-I understand that you took advantage of the government's open innovation promotion tax credit when you invested in the company.

Of course, there are advantages to our company in utilizing government policies, but more than that, we also wanted to demonstrate within the company that Ando Hazama's efforts are in line with the direction that the government is aiming for. If the perception changes from "the Innovation Department is doing something on its own" to "we are working on the same initiatives as the direction the government is aiming for," it will change the way we look at things.

In addition, I thought it would be a good way to demonstrate outside the company that Ando Hazama is proactive about open innovation. In fact, I heard from the PR department that the press release had a great response, and I was also told from an unexpected source that they had invested in a startup.

If employees have more opportunities to hear about these topics, it may have a positive impact, and other startups may approach us to collaborate with them.

Signs of Change Emerging within the Company

Tsubasa Sakakibara, Manager, Business Creation Group, Innovation Department, Ando & Hazama Co.

-Did you see any changes in your employees as you involved the company in collaborations with startups?

When the Innovation Department was launched, the response was not good even when we gave information about startups to the relevant departments and asked them to join our collaboration, and we could not get cooperation unless we desperately called for it.

But recently, employees have been asking, "Do you know of any startups that have this kind of technology?" and when we try to start something new, even departments that we have not invited to join us are now asking us to join them.

In addition, as a grassroots activity of the Innovation Department, we regularly hold events after working hours to introduce startups to our employees, and despite free participation, more than 20 people attend each event. When we changed the event to an online event with the Corona Disaster, we were surprised that even expatriate employees participated.

As a result of these gradual changes within the company and the ease of working with startups, the Innovation Department, in parallel with its efforts with Truss, began to contact startups directly, both in Japan and abroad.

We are currently working with six companies, including Truss,We want to triple or quadruple the number of startups we collaborate with.Therefore, we would like to accelerate open innovation by first establishing a track record of company-wide implementation of the Truss cloud system.

We want to fundamentally change the way we work and revolutionize the construction industry.

-What kind of future do you want to create through innovation?

As a premise, you don't want to use the Truss building materials selection cloud system only for Ando Hazama. The issues we have are issues that the industry as a whole is facing. So if we work together and Truss grows into a platform that can be used by the entire construction industry, I believe it will lead to a major reform of the industry.

On top of that, I would like to take on the challenge of changing the way the construction industry does and should work. Until now, tacit knowledge, such as skills and knowledge, were generally handed down over time, but it has been said for nearly 20 years that this would no longer be viable.

It is a system that has remained unchanged for a long time, but now that cloud computing is available at low cost and the number of startups with sharp technological capabilities is increasing, we believe that the timing is right to use technology to change the way tacit knowledge is passed on and the way work itself is done. Rather, we must change now.

For example, if heavy machinery can be handled remotely and tunnel excavation work can be done while watching a monitor in the office, the image of the industry will change 180 degrees. If work that was once thought to be dangerous is replaced by office work, women will be able to play an active role in the industry. I hope that Ando Hazama can lead the next generation of the construction industry, a future of the construction industry that we cannot imagine today.

Tomomi Tamura
He joined Snow Brand Milk Industry in 2000. He then worked for an advertising agency and as a sole proprietor before joining BizReach in 2012. Engaged in content creation, he joined NewsPicks in 2016 as an editor on the BrandDesign team, and is now a freelance writer and editor.
- Advertisment -
- Advertisment -

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

新潟日報社、オープンイノベーションプログラム2026ピッチ審査会で「三ツ目」「想ひ人」2社を選定

新潟日報社は8月4日、「新潟日報社 オープンイノベーションプログラム2026 ピッチ審査会」を開催した。Creww株式会社が提供する「Creww Growth」を活用し、5月15日から6月15日にかけて新潟県や社会が抱える課題解決に向けた協業アイデアを募集。応募61件の中から書類審査を通過した8社がピッチに参加し、審査の結果「三ツ目」(新潟県三条市)と「想ひ人」(東京都)の2社を選定した。今後は実証事業等を通じて事業化を進める予定。

【ヤマサキ × BeeInventor】高温下での過酷な作業環境から、データは命を守れるか——創業151年の工業炉建設会社とスマートヘルメット新興企業が挑む「熱中症ゼロ」の現場

明治8年創業の株式会社ヤマサキは、建設業界向けアクセラレータープログラム「ヤマサキ×オープンイノベーションプログラム2024」を通じて、スマートヘルメットを手がけるビーインベンターとのPoCを実施した。内部温度800度を超える製鉄炉の傍らで働く現場作業員の熱中症リスクをAIで早期検知するという挑戦は、今まさに第2フェーズへと移行しようとしている。プロジェクトリーダーの向井裕一氏と、BeeInventor(ビーインベンター)のNao SeoChon氏に話を伺った。

【ヤマサキ × CHAOSRU】「誰も知らない技術」を、誰もが体験できる価値へ——創業151年の工業炉建設会社とVRスタートアップが挑む、採用×認知の壁の壊し方

明治8年創業の株式会社ヤマサキは、製鉄に欠かせない築炉の技術を持ちながら、業界・企業の認知度の壁が採用の課題となっていた。この課題の突破口を探るべく参加したのが、『ヤマサキ×オープンイノベーションプログラム2024』だ。プログラムを通じて、VR・XR技術を核とする株式会社CHAOSRUとの協業をスタート。2025年7月から始まったPoC(実証実験)では、高校生向け採用説明会へのVR体験の導入により、ブース来訪者数に明らかな変化が生まれている。アクセラレータープログラムを通じたスタートアップとの協業で何が動き、何が見えてきたのか。株式会社ヤマサキのプロジェクトリーダー 田中敏彦氏と、CHAOSRU代表取締役の内藤薫氏に話を伺った。