
Serendix's "3D Printer Housing Construction Technology" supported by the Hiroshima Prefecture "Sakigake Project
Hiroshima Prefecture is working to create new value and enrich the lives of its citizens through the "Hiroshima Sandbox," a place to conduct demonstration experiments using AI, IoT, and other digital technologies, while proactively utilizing cutting-edge technologies and services.
The latest technologies under development may be difficult to implement in society or deploy within the prefecture because they are technologies that could not have been envisioned under the regulations and laws in place at the time they were enacted. Therefore, the prefectural government supports the "Saki Gake Project" by providing support for the development and demonstration costs of the technology, as well as for the relaxation of regulations and rulemaking that would otherwise be barriers.
Serendix Corporation's 3D printer housing construction technology, which is supported by this project, will be demonstrated at Bayside Beach Saka (Aza-Mizusiri, Saka-machi, Aki-gun, Hiroshima Prefecture).
Despite the existence of laws and other regulations, Serendix Corporation will work with local companies on the demonstration, with the provision of a demonstration field by the Sakigake Project.

In order to build a 3D printed house in Japan, it is necessary to include steel bars and steel frames in the structure, except for special exceptions. However, the process of assembling steel bars cannot be automated, and this is a major factor in increasing costs. In this demonstration, we will verify the unreinforced construction method and its effectiveness in reducing construction time, with the aim of realizing a "steel frame and rebar-less" construction method in the future.
One of the attractions of Serendix's 3D printer housing is its speed and low cost, which allows for construction in 24 hours, but the "steel frame and rebar-less" design significantly reduces the number of man-hours required for the work, further reducing construction costs.
*After construction, the building will be used as a rest area for events and as an exhibition facility, so steel reinforcing bars will be used in accordance with the current building code.
Demonstration Overview
Open to the public: Monday, May 27, 2024, 9:00 - 12:00 (Registration starts at 8:30)
Location: Bayside Beach Saka Parking Lot (Aza Mizuhiri, Saka-machi, Aki-gun, Hiroshima Prefecture)
Application for coverage: Please apply using the participation form. (Japanese only)https://forms.gle/n314mu2Dbu3tR8DbA)
Why did you start the experiment in Hiroshima?

Kunio Iida, COO, Serendix Corporation
From 2023, we are participating in the "Saki Gake Project" supported by Hiroshima Prefecture. Our goal is "complete robotization of the housing industry" in order to achieve "a society where people can buy a house for the price of a car.
In this context, we focused on the automotive industry, which was robotized 40 years ago. We felt that housing should follow the same process, and we wanted to borrow the knowledge of the automobile industry for this purpose. That is why I applied to Sakigake, hoping to get cooperation from Hiroshima, where the automotive industry is concentrated.
In this demonstration, high-strength fiber concrete will be used as an alternative to reinforced concrete and steel frames. It is approximately eight times stronger than ordinary concrete, and we will confirm the construction method, etc., with the aim of realizing "steel frame and rebar-less" buildings in the future.
Overview of Serendix Corporation
Serendix Corporation is Japan's first 3D printer housing manufacturer, and with the philosophy of "enriching humanity with the world's most advanced homes," we are working with various companies and organizations to achieve our first mission, "to create a society where everyone can afford a high-performance, safe, and affordable home without being tied down by mortgages. We are working in cooperation with various companies and organizations to advance our business.
In March 2022, we completed Japan's first 3D printed house, serendix10, in about 23 hours, and in 2023, we constructed and delivered the first one for sale to Saku City, Nagano Prefecture.
| name of company | Serendix Corporation |
| Establishment | August 3, 2018 |
| Location | 1-1, Koyoenmegamiyama-cho, Nishinomiya City, Hyogo Pref. |
| representative | Representative Director : Hiroyasu Koma |
| Business Overview | Development and sales of 3D printed houses |
| uniform resouce locator | https://serendix.co/ |
About the Sakigake Project
We support startups that take on the challenge of deregulation of barriers and new rule-making to realize ideas that solve social issues through the use of digital technology.
In addition to the 3D-printed houses, we are working on the social implementation of various technologies. To date, we have supported a demonstration project for unmanned navigation of small boats using AI, which has led to the creation of new workplaces, including the establishment of a new base in Hiroshima.
Click here for more information about the companies that are active in this area ↓.
WEB sitehttps://hiroshima-sandbox.jp/sakigake/









