
Purpose of the "Shinagawa New Business Creation (Business Co-Creation) Program 2022

Speaker: Mr. Koichi Endo, Director, Commercial Manufacturing Division, Shinagawa Ward
This program supports collaboration between manufacturing companies and start-ups in Shinagawa Ward with the aim of creating new businesses and resolving issues. Specifically, based on the issues raised by the manufacturing companies and the collaboration proposals from the start-ups, we brush up the co-creation projects and provide total support up to the demonstration experiment.
Although we have some concerns since this is the first initiative of its kind in Shinagawa Ward, we are very much looking forward to the new projects that will be created. We also plan to implement the program next year under the same scheme.
If your company is interested, please consider participating in the next program.
About the program itinerary

Speaker: Mr. Kensaku Tanaka, Creww Inc.
The "Shinagawa New Business Creation (Business Co-Creation) Program 2022" is a program dedicated to supporting collaboration between business companies and startups. The program aimed to create businesses by combining startups' ideas and distinctive services with the management resources of operating companies.
The program is divided into three phases: a phase to determine the participating operating companies, a phase to solicit startups and select startups to take on the challenge of the demonstration experiment through presentations, and a phase to implement the demonstration experiment through co-creation between the two companies.
Out of 81 applications, 9 companies have proceeded to the demonstration test. Both are examples of collaboration between business companies engaged in manufacturing and startups. For those who are considering participating in the next program, we hope that this will be an opportunity to hear valuable stories about how they found a way to take advantage of the program and how they promoted it.
Results of collaboration between Eiraku Electric Co. and startups."

Background of Program Participation
Speaker: Teruaki Onishi, Eiraku Electric Co.
Eiraku Electric Co., Ltd. provides railroad companies with "specification proposals, design, manufacturing, and maintenance of protection and measurement, remote monitoring and control, and communication systems" in the field of substations and information and communication facilities.
The reasons for participating in this program were, in addition to the issue of delayed technical succession due to the aging of employees, the desire to implement preventive safety for equipment by detecting abnormal sounds and smells at substations, and the desire to build an assistance system for hearing-impaired people at station platforms. Since neither of these issues could be handled by our own technical system alone, we decided to participate in this program.
[project1] Collaboration with MAI Capital "Measurement of metal fittings using video and confirmation of accuracy".
Aiming to realize DX-ization of measurement work, we conducted a demonstration experiment.
In the field, the fabrication of fittings for devices suspended from station platforms was done after measuring all necessary dimensions and drawing blueprints to avoid problems such as contact with people or obscuring other traffic signals. On the other hand, the challenge was that mistakes were not always made.
Therefore, we conducted a demonstration experiment using a method of measuring distance by shooting video and creating a three-dimensional effect. We conducted the experiment three times, using different measurement methods, to verify the results. Since there is still a difference between the values from the demonstration experiment and the actual measurements, it is necessary to continue to study the measurement method further.
[project2] Collaboration with Hmcomm "Detecting Faults in Substations by AI Noise Detection and Confirming Feasibility".
The purpose of this project is to automate substation maintenance work and preventive maintenance. Currently, we are at the stage of completing interviews with the end user, a railroad company, and are on the verge of conducting a demonstration experiment. The process involves installing sound collection terminals, acquiring normal sound data, and then utilizing the ambient sound to conduct acoustic analysis to determine whether or not there are any condition change quantities that can be detected from the special trace.
From the hearings, we heard comments such as, "It is difficult to acquire abnormal sounds themselves because actual abnormalities rarely occur," and "Efforts such as this one, which only uses outlier detection of normal sounds, are highly novel. We believe that verification of prior inspection work is important, because if it occurs, it will lead to a major accident.
[project3] Collaboration with Uni-Robot: "Verification of conversion accuracy and delay time when displaying broadcast content to smartphones.
A demonstration experiment was conducted to promote diversity on station platforms. The experiment involved attaching a Uni-Robot device to Eiraku Electric's broadcasting equipment and displaying the content of the broadcast on a smartphone.
The results of the demonstration experiment showed that the delay time from the broadcast to the display on the smartphone screen was practical and useful. In terms of conversion accuracy, it was found that while conversion accuracy was generally good when automatic broadcasting was the sound source, it was poor when microphone broadcasting was the sound source.
We assume that the accuracy can be improved in the future by registering words in advance.
Results of collaboration between Katsuyoshi Electric Mfg. Co. and startups."

Background of Program Participation
Speaker: Mr. Dai Harano, Katsuyoshi Electric Manufacturing Co.
Katsuyoshi Electric Manufacturing Co., Ltd. is a comprehensive switchboard manufacturer for power distribution, monitoring, and control.
My reason for participating in this program is that I wanted to explore a new position in this turbulent era of globalization, DX, and market needs. I want to work positively on both cutting-edge hardware and software technologies and existing key technologies, and to bring innovation to the entire switchboard industry.
In this program, we solicited collaboration proposals based on the theme of creating new value through "switchboards" × technology. Specifically, we sought proposals from startups under the following four themes: (1) creating new value by adding functions to switchboards, (2) implementing an automatic monitoring and control system based on measurement data and AI prediction, (3) expanding monitoring/control technology/products to other fields, and (4) establishing a new maintenance system by utilizing technology. The proposals were solicited from startups.
project1] Collaboration with AltoAir "Condition Monitoring and Abnormality Prediction of the Panel".
Speaker: Hiromitsu Aiwatari, Katsuyoshi Electric Manufacturing Co.
We have taken the initiative to seek new value by incorporating IoT and AI technologies into switchboards. The background of this project is the problem that an abnormality in a switchboard can lead to serious accidents such as power outages and fires. Although alarm monitoring during the occurrence of abnormalities in switchboards is still in place today, it is necessary to prevent the occurrence of abnormalities before they occur.
Is it possible to prevent accidents from occurring by providing alert notifications based on AI predictions?
The theme of "condensation," which is considered to be one of the possibilities that could lead to power outages and fire accidents, was set as one of the themes, and experiments were conducted using AI.
First, we verified that data transfer between each device, including AI devices, PLCs, and thermometers, was possible and that correct data was obtained. Next, we verified the validity of the algorithm by actually using the condensation prediction algorithm and changing the ambient environment.
After intentionally causing condensation to occur and then checking whether the program would behave as intended, we were able to confirm that the program was able to issue predictions up to condensation. On the other hand, since there was still room for improvement in the accuracy of the experiment, we intend to continue verification over a longer period of time, approximately one year, to optimize the algorithm. We will also verify the durability of the device in preparation for commercialization.
project2] Collaboration with SONAS "Wireless Technology for Switchboards. A demonstration experiment of the use of UNISONet in monitoring systems".
Speaker: Mr. Kenichi Kikuchi, Katsuyoshi Electric Manufacturing Co.
When monitoring stations acquire monitoring information from switchboards, even for a single point of information, a wired connection is essential, which requires wiring work. However, there are issues such as the lack of installation routes and the inability to take a period of time to install the lines. Therefore, we took on the challenge of collaborating with the aim of converting the signal lines for monitoring and control to wireless.
In fact, we installed a wireless unit in a control panel and distribution board in our factory and conducted a demonstration test, which showed that the unit has sufficient functionality for general use and that it is highly feasible.
The ability to reduce electrical work saves costs and reduces the amount of work required when various panels need to be relocated.
On the other hand, if the wireless unit is installed only inside the panel, the location of the panel from which data is acquired is dependent on the customer's environment. This also brings up issues such as the uncertainty of stable communication quality. We also found that the communication speed is not suitable for emergency stop and alarm acquisition related to the person's name. In the future, we will study specific solutions to the issues and work toward the construction and test operation of a monitoring system using UNISOnet's input/output units.
Results of collaboration between Shinko Seisakusho Co. and startups."

Background of Program Participation
Speaker: Mr. Natsuki Matsunaga, Shinko Seisakusho Co.
Shinko Seisakusho is in the business of cutting plastic products.
Behind our participation in the program was our strong desire to create a new business axis outside of our existing business, as well as the lack of progress in passing on the technologies and knowledge of our predecessors in each department. Therefore, we solicited collaboration proposals to solve the two issues of human automation and technology transfer, and conducted a demonstration experiment with the aim of promoting DX, improving work efficiency, and fostering human resources to inherit the skills of our predecessors cultivated over the past 60 years.
[project1] Collaboration with Episotec Corporation "Operation of work manuals and improvement of work efficiency by using AR field support application".
Speaker: Mr. Yuta Naito, Episotech Corporation
Episotech offers Dive, an AR on-site support application for businesses that want to transform their technology transfer.
Speaker: Mr. Shinichi Fukuda, Shinko Seisakusho Co.
Aiming to improve the operation of work manuals and work efficiency, the verification experiment focused on three points: whether new and inexperienced workers could do the same work as experienced workers if they had AR manuals; contrast with paper manuals; and the ability of different age groups to respond and adapt to AR applications.
The results of the experiment, in which videos were placed in the AR and the user was allowed to operate based on the videos, were highly evaluated: "The application was easy to handle, the conceptualization was unique, and the user was able to enjoy the work while working with it. On the other hand, we also found an issue with the speed of the videos.
In the future, we will seek new cases where the advantages of AR can be utilized and improve the video viewer function. We will also aim to change the device from iPad to AR glasses, and consider demonstrating the use of spatial recognition capability in situations such as making manuals that use both hands.
project2] "Development of an automatic quotation system by introducing OCR" in collaboration with piland Inc.
Speaker: Mr. Riku Nagano, CEO, piland Inc.
piland's strength is its ability to provide AI development/consulting and software development in a single package. In this case, piland's know-how is being used to conduct a demonstration experiment as an image-based OCR technology.
Speaker: Mr. Shunsei Iwata, Shinko Seisakusho Co.
In a demonstration experiment for the development of an automatic quotation system, 20 types of drawings were selected to check the accuracy of character recognition. As a result, it was found that extremely low image quality, small size, and symbols other than letters tended to be difficult to be recognized.
In particular, we found that symbols other than letters were difficult to recognize. Therefore, we found it necessary to have a function to understand the meaning of symbols other than letters and to organize the information. In the future, we intend to study the affinity between AI and automatic quotation systems in depth, and to consider the possibility of implementing such a system within the company.
From the demonstration experiments conducted through the two collaborations, we will promote DX within the company so that the analog know-how cultivated in the past can be transferred to AR and the knowledge of skilled workers can be transferred to AI.
Yoshimura Corporation and the startups as a result of their collaboration."

Background of Program Participation
Speaker: Mr. Takao Hashimoto, Yoshimura Corporation
Yoshimura Co., Ltd. designs, manufactures, and sells food packaging materials and food/tea ware.
I joined the program because I wanted to collaborate with start-ups, not only on our own, to build the future.
The call for applications was based on the following four themes: to further exploit the potential of packaging materials, to realize a cycle of production and use of environmentally friendly packaging materials, to contribute to local communities and people's happiness through tea, and to promote the digitalization of their own companies and their customers.
[project1] Collaboration with MAI Capital "Exploring ways to develop the LeafTea Cup business".
Speaker: Minoru Ohne, Planning and Promotion Department, Yoshimura Co.
Yoshimura offers a product called LeafTea Cup, in which tea leaves are pre-filled in a paper cup and a filter is set in the middle of the paper cup, allowing the user to drink delicious Japanese tea immediately by simply adding hot water. Together with Mr. Ishizuka of MAI Capital, we have been exploring hypotheses about what type of business this cup would fit into. Here are three of them that have a high possibility of realization.
The first is "business development through the use of Silver Centers. We thought that new businesses could be created by introducing cups from silver human resources to companies that already have business with the Silver Human Resources Center. Currently, we are in the process of developing a scheme.
The second is "business development in the nursing care market. We were faced with the challenge that people with a high level of nursing care cannot hold paper cups and that the drinks need to be highly viscous. We noted that there is a subscription service for daily necessities as part of the services provided by nursing care insurance companies, and we will dig deeper into the possibility of realizing the provision of such a service.
Lastly, we are "developing business in the psychiatric hospital market. We have been introduced to a company that provides consumables to psychiatric hospitals, and we intend to combine the identification of issues and proceed with product development.
Speaker: Mr. Kenya Ishizuka, MAI Capital
In the future, prenatal and postnatal care is likely to become the focus of national policy, and we would like to develop our business in that market as well.
project2] Collaboration with TZEN Corporation "Product development of new package Green Tea Stick".
Speaker: Mr. Takao Hashimoto, Yoshimura Corporation
The company that has acquired the rights to the product introduced us to a company that can perform the filling process, but it turns out that the perforation process needs to be done separately. We are in the process of finding and contacting a perforation processing manufacturer. Although the program period has ended, we hope to continue exploring possibilities.
Program Summary (Ten Ijichi, CEO, Creww, Inc.)

In the area of innovation, the possibilities are endless. We believe that once you have experienced this, you will have the know-how to put it into practice, and we hope that you will continue to challenge yourself to co-create with various people. We believe that this will be of utmost value to the business companies.
I also felt that the atmosphere in today's presentation was stiff. In order to engage in open innovation, the "ability to get involved" is very important, both inside and outside the company. In co-creation, it is essential to keep searching for people who are willing to become friends with uncertain outcomes. By speaking with more confidence and enthusiasm, you will find many people who want to get involved. The key to increasing the number of people who want to be involved is to show them the way.
Creww would also like to make the entire Shinagawa Ward area more lively so that Creww can achieve smoother and greater results, and we look forward to working with you in the future. Thank you very much for your time today.










