Tuesday, November 17, 2026

OTICS x Startups Co-Creation Program 2023| Creating New Value with Startups

OTICS, a manufacturer and distributor of automotive components, held an accelerator program for Toyota Motor Corporation and other leading Japanese automakers such as Subaru and Isuzu Motors.
We will challenge to create businesses in new fields through open innovation with startup companies that have strengths in many areas, not only in the mobility industry. The deadline for applications is April 9.

What is the background of the co-creation program?

(For more than 100 years since its establishment, OTICS Corporation has been engaged in the manufacture and sale of automotive parts for Toyota Motor Corporation, Subaru Motor Corporation, Isuzu Motors Limited, and other leading Japanese automobile manufacturers.

We supply almost all of the engine parts that are used in Toyota vehicles, which are our core products. This is extremely rare in the automotive parts industry, where orders are often dispersed in order to hedge risk.

In this context, we would like to challenge not only the mobility industry, but also the "creation of new businesses" that will play a part in the next era or fill a niche, and "carbon neutrality" to achieve the SDGs, which is the mission of the company.

We would like to take on the challenge of creating businesses in new fields through open innovation between our company, which has a wealth of experience and technology cultivated through the manufacture of automotive parts, and startup companies that have strengths in many areas.

Outline of "OTICS × Startup Co-Creation Program 2023

▶︎ Application deadline: Sunday, April 9, 2023, 24:00
▶︎ Target companies: all domestic and international startups. Any industry.
▶︎ Participation fee: Free
▶︎ Sponsored by OTICS, Inc.

What we want to achieve with the Co-Creation Program

1. we would like to offer new products with OTICS' manufacturing technology!

We mainly make mass-produced automobile engine parts, but we are looking for new business development for the future. We believe that we can co-create with startups by taking advantage of our technological capabilities, which have produced parts ranging from racing engines and rocket parts in single-piece orders to parts in the order of 100 million pieces per year.
In particular, we hope to solve problems in various phases, such as "We have an idea, but there are issues in terms of prototyping and commercialization," or "We have a prototype, but we need more partners when it comes time for production!

Our products are introduced in Resource 01. We hope to utilize our manufacturing technology not only for automobiles, but also for a wide range of other aspects of manufacturing. We welcome your ideas, even at the conceptual stage, and would be happy to receive a wide range of ideas from you!

[Example of an idea].
We are widely looking for co-creation with our resources in all areas.
■Manufacture of automotive electrification and related components
■Development of next-generation mobility prototypes, including electric kickboards
■Development of environment-related facilities, equipment, and generators
■Development of golf and other sporting goods
■Development of health care products such as prosthetic legs and electric wheelchairs
■Development of daily necessities such as camping equipment, knives and forks, and household goods

2. want to make effective use of energy emitted from factory equipment!

The manufacturing of automotive parts emits a lot of energy in the process. With fuel and electricity prices continuing to rise, "energy conservation" has become a highly important issue.
In particular, it is necessary to take measures from the perspectives of both "reduction of fuel and electricity costs" and "reduction of CO2 emissions," and we are examining the possibility of efficiently recovering and reusing the various types of energy emitted from each of our facilities.

In co-creating with startups, we hope to help achieve carbon neutrality, which can be easily implemented by small and medium-sized manufacturing companies!

Example of energy
■ Heat energy of about 100°C discharged from the die casting machine
■ Vibration energy generated from a 300-ton press 80 times per minute, or 50,000 times per day
■ Fluid energy of cutting fluid and rotational energy of tools used in cutting machines
  
[Example of an idea].
■Utilization of 100°C exhaust heat for heat source reuse, drying, and power generation
■Utilization of press machine vibration for soundproofing by power generation and separate energy conversion
■Utilization of fluid and rotational energy for pumps, blowers, and wind turbines

Management resources (resources) of OTICS Corporation that can be utilized by startups

About Us and Our Products

We have a number of products that have been created using our technical expertise. For more information about our company and products, please watch the video below or visit our website.
Company Introduction (Video/Home Page)
https://www.youtube.com/watch?v=cVlMr3UtWn0https://www.otics.co.jp/about/
Engine parts
https://www.otics.co.jp/products/engine-parts/
Electric Vehicle Parts
https://www.otics.co.jp/products/electric-parts/
Drivetrain components
https://www.otics.co.jp/products/drive-train-parts/
Prototype development parts
https://www.otics.co.jp/products/prototype/

Tier 1" suppliers such as automakers

Domestic and foreign automobile manufacturers such as Toyota, Subaru, Isuzu, Daihatsu, and GM. Agricultural equipment manufacturers such as Yanmar, Iseki, and Kubota. We supply parts as a "Tier 1" supplier to Yamaha's marine division and others.

Technical capabilities cultivated in automotive engine parts

We have an integrated in-house production system that includes product development, process design, and equipment manufacturing, as well as plastic forming, cutting, polishing, heat treatment, and assembly.
We maintain a defect rate of less than 0.02ppm, even though there are many parts that are produced at 100 million units per year.
As of August 2022, we hold a total of 217 patents in Japan and abroad.
The company has a technical development and manufacturing division for aluminum casting (die casting) of automotive parts.
Our prototyping department accepts orders from one piece and has equipment and engineers capable of processing products in micrometer increments. We have experience in delivering racing engines and rocket parts.
We believe that "quality is the lifeblood of a company," and have strengthened our corporate structure and quality control system by winning the Deming Prize and acquiring IATF 16949 certification.

Domestic and international plants and other facilities

In Japan, there are eight factories: six in Nishio City, Aichi Prefecture, and one each in Toyota City and Gamagori City.
The company has four overseas offices: one each in the U.S., China, Thailand, and Indonesia.
The facility also has a wide range of non-plant facilities, including grounds (16,000 m2), an empty plant site (30,000 m2), a main hall (200-seat capacity), cafeterias (at each plant), and OTICS Forest (green space area).

Casting, machining, measuring equipment, etc. Total: approx. 4,000 units

The facility is equipped with die casting machines (350 to 1,100 tons), presses (60 to 630 tons), machining centers, vacuum cleaners, carburizing and quenching equipment, centerless grinding machines, assembly machines, and other equipment.
We have a full range of measuring instruments, including measuring instruments (shape and roughness), 3D measuring instruments, 3D scanners, CT scanners, and electron microscopes, which enable us to measure a variety of complex-shaped objects.

A network of activities and support at any time

The top management's idea is to participate in Creww's activities, and they attend every meeting. This allows us to conduct activities with a sense of speed and without divergence from management.
Currently, activities are centered on the secretariat, but there is a system in place that allows project teams to be organized according to the nature of the project.
Manufacturing technologies not available in OTICS can obtain assistance from a variety of partner companies.

Support for Demonstration Experiments

We would like to be actively involved in areas other than automotive parts manufacturing. We would like to build a win-win relationship with start-up companies by providing support for equipment and experimentation costs related to demonstration tests with them to create new businesses.

Various qualifications

QC Certification
We are making efforts to improve quality control by focusing on the QC (quality control) certification test. All employees, from the quality assurance department to technical, manufacturing, sales, and clerical staff, have obtained this certification. We have an environment in place to create products and services that meet the needs of our customers.

Proficiency test holder
We have a large number of special, first, and second class technicians in ordinary lathes, milling machines, machine inspection, general heat treatment, carburizing, cutting tool grinding, machine maintenance, and more. We can make any kind of products with high precision.

Enthusiasm for the Program

We are a team working in a department responsible for the business management of the entire company. The automotive industry is said to be in the midst of a once-in-a-century transformation, and it has become necessary to broaden the industry concept and view it as a mobility (mobility, mobility, and fluidity) domain.
With the need for unconventional ideas and various reforms, we have a group of members who are eager to make new friends. We look forward to taking on new challenges with startup companies that have strengths in areas completely different from ours.

PORT Editorial Officehttps://port.creww.me/
PORT by Creww is an open innovation media for startups, entrepreneurs, entrepreneurs in recovery, and companies seeking to create new businesses on the theme of social issues, operated by Creww Co.
- Advertisment -
- Advertisment -

Featured

東芝のオープンイノベーション、協業検討に進む2社が決定 ダイナミックマッププラットフォームとArithmerを選定

ReGACY Innovation Group株式会社(東京都千代田区)は、企画・運営パートナーとして支援する株式会社東芝の「Toshiba OPEN INNOVATION PROGRAM 2026」で、協業検討に進む参加企業2社が決定したと発表した。7月に募集した共創プランの中から、ダイナミックマッププラットフォーム株式会社とArithmer株式会社を選定。両社は東芝グループの「Hybrid-3D LiDAR」と「気象データサービス」を活用し、物流・インフラ分野などでの新たなソリューション共創を目指す。12月中旬の成果発表会に向け、実証と事業性検証を進める。 本プログラムでは、2026年7月6日から7月26日まで参加企業を募集しており、応募のあった共創プランの中から、ダイナミックマッププラットフォーム株式会社、Arithmer株式会社の2社が選定されました。 両社は、東芝グループが保有する「Hybrid-3D LiDAR」および「気象データサービス」の技術・データを用いて、物流・インフラ分野やデータ活用領域における新たなビジネスソリューションの共創を目指します。 今後は、12月中旬に予定されている成果発表会に向けて実証や事業性検証を進めるとともに、事業化を見据えた協業の検討を加速していきます。

新潟日報社、オープンイノベーションプログラム2026ピッチ審査会で「三ツ目」「想ひ人」2社を選定

新潟日報社は8月4日、「新潟日報社 オープンイノベーションプログラム2026 ピッチ審査会」を開催した。Creww株式会社が提供する「Creww Growth」を活用し、5月15日から6月15日にかけて新潟県や社会が抱える課題解決に向けた協業アイデアを募集。応募61件の中から書類審査を通過した8社がピッチに参加し、審査の結果「三ツ目」(新潟県三条市)と「想ひ人」(東京都)の2社を選定した。今後は実証事業等を通じて事業化を進める予定。

【ヤマサキ × BeeInventor】高温下での過酷な作業環境から、データは命を守れるか——創業151年の工業炉建設会社とスマートヘルメット新興企業が挑む「熱中症ゼロ」の現場

明治8年創業の株式会社ヤマサキは、建設業界向けアクセラレータープログラム「ヤマサキ×オープンイノベーションプログラム2024」を通じて、スマートヘルメットを手がけるビーインベンターとのPoCを実施した。内部温度800度を超える製鉄炉の傍らで働く現場作業員の熱中症リスクをAIで早期検知するという挑戦は、今まさに第2フェーズへと移行しようとしている。プロジェクトリーダーの向井裕一氏と、BeeInventor(ビーインベンター)のNao SeoChon氏に話を伺った。

【ヤマサキ × CHAOSRU】「誰も知らない技術」を、誰もが体験できる価値へ——創業151年の工業炉建設会社とVRスタートアップが挑む、採用×認知の壁の壊し方

明治8年創業の株式会社ヤマサキは、製鉄に欠かせない築炉の技術を持ちながら、業界・企業の認知度の壁が採用の課題となっていた。この課題の突破口を探るべく参加したのが、『ヤマサキ×オープンイノベーションプログラム2024』だ。プログラムを通じて、VR・XR技術を核とする株式会社CHAOSRUとの協業をスタート。2025年7月から始まったPoC(実証実験)では、高校生向け採用説明会へのVR体験の導入により、ブース来訪者数に明らかな変化が生まれている。アクセラレータープログラムを通じたスタートアップとの協業で何が動き、何が見えてきたのか。株式会社ヤマサキのプロジェクトリーダー 田中敏彦氏と、CHAOSRU代表取締役の内藤薫氏に話を伺った。